Ken-tool 30165 Dual Wheel Lug Stud Manuel d'utilisateur télécharger pdf

768 E. North Street, P. O. Box 9320, Akron, Ohio 44305 – (330) 535-7177; Fax: (330) 535-1345 or (800) 872-4929

www.kentool.com

Part No.: 30165-98

30165

HOW THE 30165 DUAL WHEEL LUG STUD REMOVER WORKS

The dual wheel stud remover is used to remove the 13/16” flanged square drive inner

cap nuts, which secure the inside dual wheels on truck and trailers. Frequently the

square head becomes stripped making it impossible to remove with sockets or

wrenches. To use the 30165 stud remover simply drive the stud remover over the 1-

1/8” threads of the inner cap nut with a soft-faced non-metal dead blow hammer.

(Always wear safety glasses when striking hardened steel). A series of heat-treated

self-tapping splines cut into the threads of the cap nut. Use a standard 1-½” socket or

wrench to unscrew the stripped inner cap nut. After removal, the stripped cap nut may

be forced out of the 30165 sockets with a punch or drift pin inserted through the hole in

the back of the socket.

The 30165 socket will eventually destroy its self-tapping splines and will need to be

replaced with a new 30165 socket.

Special

Self-Tapping Splines

1-½” Drive

LIMITED WARRANTY

Although the best material and heat treating available is used to manufacture the

30165 socket, the manufacturer recognizes that after a few uses (4 to 10) the 30165

socket will destroy its self-tapping splines and must be replaced with a new

30165 socket. For this reason the manufacturer cannot replace damaged 30165

sockets under the normal terms of our limited warranty.

We suggest the user of 30165 sockets add the eventual replacement cost of the

30165 socket into the cost normally charged for removing stripped inner cap nuts.

1 2

768 E. North Street, P. O. Box 9320, Akron, Ohio 44305 – (330) 535-7177; Fax: (330) 535-1345 or (800) 872-4929 www.kentool.com Part No.: 30165-98 301

Page 2

768 E. North Street, P. O. Box 9320, Akron, Ohio 44305 – (330) 535-7177; Fax: (330) 535-1345 or (800) 872-4929 www.kentool.com Part No.: 30165-98

Pas de commentaire

Ken-tool 30165 Dual Wheel Lug Stud Manuel d'utilisateur