Ken-tool Bendix ADB22X-V Air Disc Brakes Manuel d'utilisateur télécharger pdf (Page 6)

Table 1: Inspection Period

When

you

check

the tire

pressures

(4 to 5 times during the pad lifetime)

At the

very

least,

every

four (4)

months

At least

once

every

year

(and at

every

pad

replace-

ment)

About ever four (4)

months for over-the-

road applications:

About every three (3) months

for higher-duty applications:

e.g. line haul, RV,

open-highway

coaches, etc.

e.g. pick-up & delivery,

off-highway, construction,

logger, concrete mixer, dump

truck, city transit bus, refuse,

school buses, etc.

Inspections with the wheel mounted (Sections 2.1 - 2.3)

Inspect the pad thickness by

checking the mechanical wear

indicators*. See Section 2.1.

Inspect the running clearances

using the quick inspection

technique. See Section 2.2.

Inspect the visible part of the rotors

for cracks, etc. See Section 2.3.

Inspections with wheel removed (Section 4)

Inspect the pads and entire rotor

surfaces for cracks, etc. (Bendix

splined disc

rotors: Inspect

retaining hardware and check

torques) See Section 2.3.

Inspect the running clearances and

adjuster operation.

See Sections 2.2 and 4.2.

Inspect the caliper travel.

See Section 4.1.

Inspect the tappet and boot

assemblies. See Section 4.6.

Inspect all caps, hoses, and brake

exterior for damage etc.

TABLE 1 - PREVENTIVE MAINTENANCE SCHEDULE

2.0 PREVENTIVE MAINTENANCE

Regular inspection and maintenance of air disc brake

components is an important part of vehicle maintenance.

The maintenance practices outlined here are recommended

in addition to all standard industry practices (including

daily pre-trip inspections.) Also, see the vehicle's manual

for recommendations. Keep track of the results of your

maintenance inspections to assist you in determining the

ideal maintenance intervals for the vehicle.

Use the table below for a guide to maintenance interval

planning, however, depending on the particular vehicle's

use, more frequent checks of the components may be

necessary.

SECTION TWO: PREVENTIVE MAINTENANCE SCHEDULE AND WHEEL-ON INSPECTIONS

* For vehicles with

electronic wear

indicators, use the

dash indicator(s)

and/or the hand-held

diagnostic tool to

regularly monitor the

pad wear.

See Section 5.2.

Section Two

Section Page

2.0 Preventive Maintenance . . . . . . 6

2.1 Brake Pad and Rotor Inspections . . . 7-8

2.2 Running Clearance Quick Inspection . . 8

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Ken-tool Bendix ADB22X-V Air Disc Brakes Manuel d'utilisateur Page 6

Commentaires sur ces manuels